Abstract :

The well logging method is one of the methods used in petrophysical analysis to assess the formations used in obtaining information and shadows related to a reservoir. In addition, in an effort to determine success in the oil and gas field, this method is also included for calculating petrophysical values such as permeability, water saturation, and porosity. Then this value will be used in finding the initial oil reserves (OOIP) and initial gas reserves (GIIP) in the MA field. This will be very helpful in developing further oil and gas fields because materials are available as a basis for reference. This study analyzes the MA field precisely at the MA-06 Well by utilizing the qualitative and quantitative petrophysical analysis method by only referring to log data because there is no availability of core data. To find out the depth of the prospect zone and what fluid is in the formation, the authors analyze it in a qualitative way, namely by determining the permeable zone, then looking at the resistivity value, then determining the type of fluid on track 3. While in obtaining petrophysical values such as shale volume, porosity, water saturation and rock permeability the authors chose to use quantitative methods to analyze them. So that the results of the analysis carried out, it was found that the MAXX well has a net sand thickness of 36 feet and a net pay of 36 feet with an average value of shale volume, porosity, water saturation and permeability in that zone respectively 34.8%. , 18.03%, 35.3%, and 38.31 mD.

---

Keywords :

Logging Analysis, Netpay, Permeability, Prospects, Zone Porosity.

---

References :

1. Nugrahanti, A. (2015). Penilaian Formasi I. Jakarta: Universitas Trisakti.
2. Hendrysman, A. (2019). Penilaian Formasi. Jakarta: Unknown.
3. Sitaresmi, R. (2015). ANALISIS PENENTUAN ZONA PRODUKTIF DAN PERHITUNGAN CADANGAN. Jakarta: Universitas Trisakti.
4. Sclumberger. (2020). Compensated Density Log . oilfield glossary , 8.
5. Schlumberger. (1997). Log Interpretation Chart. Houston Taxas: Schlumberger.
6. De Witt, M. (1991). Petroleum Geology Of The Appalachian Basin. New York: USA Geological Survey.
7. Crain, E. R. (1999). Crain Petrophisicals Handbooks. New York: Client List.
8. Puri Wijayanti, R. S. (2020). Evaluation Calculation Of the Water Saturation With Simandoux And Indonesia Method In P Layer R Field. Jurnal Ilmiah Teknik Perminyakan , 142-146.
9. Puslitbang tekMIRA. (2011). PEMBANGUNAN APLIKASI PEMANTAUAN PRODUKSI TAMBANG BATUBARA DIBAWAH TANAH. Final Draft , 63.
10. Ramadhan, N. (2019). ANALISIS PEMILIHAN ZONA PROSPEK BERDASARKAN DATA LOG DAN PARAMETER PETROFISIKA. JAKARTA: USAKTI.
11. Koesomadinata. (1980). Geologi Minyak Dan Gas Bumi. Bandung : Insitut Teknologi Bandung.
12. cannon, s. (2016). petrophysics: a practical guide. west sussex.