Abstract :

This research aimed is to determine the effect of chloramphenicol concentration on the imprinting factor (IF) value of the Molecular Imprinted Polymer (MIP). Imprinting Factor is a standard of the interaction power between printed polymer and template molecule. The IF value was calculated based on the adsorption capacity value between MIP and blank polymer (BP). MIP was synthesized from non-imprinted polymer (NIP) using the precipitation method with chloramphenicol as a template, methacrylic acid (MAA) as a monomer, and ethylene glycol dimethacrylate (EGDMA) as a crosslinker. The results showed that the optimum concentration was at 10 ppm with the IF value of 5,005. The isothermal adsorption result of Chloramphenicol using MIP can best be described by the Langmuir model. The limit of detection (LOD) value was 0.098 and the limit of quantification (LOQ) value was 0.327.

---

Keywords :

Adsorption, Chloramphenicol, Imprinting factor, Isothermal, MIP.

---

References :

1. Rismawati, “Pengujian Antibiotik Kloramfenikol Pada Crab Meat (Daging Kepiting) Rajungan (Portunnus pelagicus),” 2018.
2. Commission Regulation, “COMMISSION REGULATION (EU) 2019/1871 on reference points for action for non-allowed pharmacologically active substances present in food of animal origin and repealing Decision 2005/34/EC,” 2019.
3. Zhang and J. Lei, “Synthesis and evaluation of molecularly imprinted polymeric microspheres for chloramphenicol by aqueous suspension polymerization as a high performance liquid chromatography stationary phase,” Bull Korean Chem Soc, vol. 34, no. 6, pp. 1839–1844, Jun. 2013, doi: 10.5012/bkcs.2013.34.6.1839.
4. Thongchai, B. Liawruangath, S. Liawruangrath, and G. M. Greenway, “A microflow chemiluminescence system for determination of chloramphenicol in honey with preconcentration using a molecularly imprinted polymer,” Talanta, vol. 82, no. 2, pp. 560–566, Jul. 2010, doi: 10.1016/j.talanta.2010.05.007.
5. Amin, S. Damayanti, and S. Ibrahim, “Synthesis and Characterization Molecularly Imprinted Polymers for Analysis of Dimethylamylamine Using Acrylamide as Monomer Functional,” Jurnal Kefarmasian Indonesia, pp. 76–84, Oct. 2018, doi: 10.22435/jki.v8i2.330.
6. D. Chrisnandari, B. I. Kimia, and A. F. Surabaya, “Sintesis dan Karakterisasi Molecularly Imprinted Polymer Untuk Kloramfenikol Menggunakan Polimerisasi Fasa Ruah,” Journal of Pharmacy and Science, vol. 3, no. 1, 2018.
7. N. Hasanah, N. Safitri, A. Zulfa, N. Neli, and D. Rahayu, “Factors affecting preparation of molecularly imprinted polymer and methods on finding template-monomer interaction as the key of selective properties of the materials,” Molecules, vol. 26, no. 18. MDPI, Sep. 02, 2021. doi: 10.3390/molecules26185612.
8. Meysia Yusuf and M. Monica Sianita, “Pengaruh Jumlah Porogen Pada Sintesis Mip (Molecularly Imprinted Polymer) Terhadap Adsorpsi Mip-Kloramfenikol The Effect Of Amount Of Porogen On Mip (Molecularly Imprinted Polymer) Synthesis Toward The Adsorption Of Mip-Chloramphenicol,” 2022.
9. Madikizela, N. Tavengwa, and V. Pakade, “Molecularly Imprinted Polymers for Pharmaceutical Compounds: Synthetic Procedures and Analytical Applications,” in Recent Research in Polymerization, InTech, 2018. doi: 10.5772/intechopen.71475.
10. Lu et al., “Dual-template molecularly imprinted polymers for dispersive solid-phase extraction of fluoroquinolones in water samples coupled with high performance liquid chromatography,” Analyst, vol. 144, no. 4, pp. 1292–1302, Feb. 2019, doi: 10.1039/c8an02133c.
11. D. Khatibi, A. H. Mahvi, N. Mengelizadeh, and D. Balarak, “Adsorption–desorption of tetracycline onto molecularly imprinted polymer: Isotherm, kinetics, and thermodynamics studies,” Desalination and Water Treatment, vol. 230, pp. 240–251, Aug. 2021, doi: 10.5004/dwt.2021.27396.
12. Pérez-Moral and A. G. Mayes, “Comparative study of imprinted polymer particles prepared by different polymerisation methods,” Analytica Chimica Acta, vol. 504, no. 1, pp. 15–21, Feb. 2004, doi: 10.1016/S0003-2670(03)00533-6.
13. Oktavia, F. Listiadi, and M. M. Sianita, “The Effect Of Variation Extractant Composition On Adsorption Capability Of Chloramphenicol Using Molecularly Imprinted Polymer (MIP),” 2021.
14. Turiel and A. Martín-Esteban, “Molecularly imprinted polymers for sample preparation: A review,” Analytica Chimica Acta, vol. 668, no. 2. pp. 87–99, Jun. 2010. doi: 10.1016/j.aca.2010.04.019.
15. Monica and N. Nyoman Tri, “Comparison of the method used for extraction chloramphenicol from its Molecularly Imprinted Polymer (MIP) using chloroform as porogen,” 2019.
16. J. Maranata, N. O. Surya, and A. N. Hasanah, “Optimising factors affecting solid phase extraction performances of molecular imprinted polymer as recent sample preparation technique,” Heliyon, vol. 7, no. 1. Elsevier Ltd, Jan. 01, 2021. doi: 10.1016/j.heliyon.2021.e05934.
17. Sajini and B. Mathew, “A brief overview of molecularly imprinted polymers: Highlighting computational design, nano and photo-responsive imprinting,” Talanta Open, vol. 4. Elsevier B.V., Dec. 01, 2021. doi: 10.1016/j.talo.2021.100072.
18. A. Lorenzo, A. M. Carro, C. Alvarez-Lorenzo, and A. Concheiro, “To remove or not to remove? The challenge of extracting the template to make the cavities available in molecularly imprinted polymers (MIPs),” International Journal of Molecular Sciences, vol. 12, no. 7. pp. 4327–4347, Jul. 2011. doi: 10.3390/ijms12074327.
19. Nantasenamat, C. Isarankura-Na-Ayudhya, T. Naenna, and V. Prachayasittikul, “Quantitative structure-imprinting factor relationship of molecularly imprinted polymers,” Biosensors and Bioelectronics, vol. 22, no. 12, pp. 3309–3317, Jun. 2007, doi: 10.1016/j.bios.2007.01.017.
20. Negarian, A. Mohammadinejad, and S. A. Mohajeri, “Preparation, evaluation and application of core–shell molecularly imprinted particles as the sorbent in solid-phase extraction and analysis of lincomycin residue in pasteurized milk,” Food Chemistry, vol. 288, pp. 29–38, Aug. 2019, doi: 10.1016/j.foodchem.2019.02.087.
21. Buvaneswari and M. Singanan, “Review on scanning electron microscope analysis and adsorption properties of different activated carbon materials,” Materials Today: Proceedings, Oct. 2020, doi: 10.1016/j.matpr.2020.09.426.
22. Sumarno and dyah ika kusumaningtyas, “Penentuan Limit Deteksi Dan Limit Kuantitasi Untuk Analisis Logam Timbal (Pb) Dalam Air Tawar Menggunakan Alat Spektrofotometer Serapan Atom,” vol. 16, 2018.