Abstract :

Modern foreign and domestic scientific literature has extensive information on the creation of a diesel engine with heat-insulated parts. Most of these studies are devoted to the development of technology for obtaining heat-insulating composite materials, methods for modeling thermal processes in internal combustion engines and reducing fuel consumption. Solving the problem of a diesel engine by reducing unproductive costs of thermal energy in the thermodynamic cycle and improving the performance of a diesel engine with heat-insulated parts based on the organization of the working process at high wall temperatures has not been sufficiently studied to date, which led to the choice of the topic of this study. In the Resolution of the President of the Republic of Uzbekistan (No. PP-4422 dated 22 August 2019) – “On Accelerated Measures to Improve Energy Efficiency in Economic and Social Sectors, the Introduction of Energy-Saving Technologies and the Development of Renewable Energy Sources”, The President of the Republic of Uzbekistan Sh.M. Mirziyoyev noted that in order to comprehensively organize work to improve energy efficiency, widely introduce energy-saving technologies and renewable energy sources, radically reduce the energy intensity of economic and social sectors by involving available resources and untapped potential, taking into account advanced foreign experience, and also ensuring the rational and efficient use of fuel and energy resources. [1].

One of the most important concepts for a deep restructuring of the economic mechanism of the Republic of Uzbekistan is the creation of an integral, efficient and flexible system of economic management and the implementation on this basis of a program to improve the technical level and quality of machines.

---

Keywords :

Diesel Engine, Heat Stressed, Machines

---

References :

1. Resolution of the President of the Republic of Uzbekistan “On Accelerated Measures to Improve Energy Efficiency in Economic and Social Sectors, the Introduction of Energy-Saving Technologies and the Development of Renewable Energy Sources”, dated 22 August 2019, No. PP-4422).
2. Kavtaradze R.Z. Approximate determination of the local heat transfer coefficient in a diesel cylinder with a semi-separated combustion chamber. // Proceedings of universities. Engineering. -1985. -N 5, pp. 86-91.
3. Z. Kavtaradze, Local heat transfer in reciprocating engines. M.: Publishing house of MSTU im. N. E. Bauman. (2001). 592 p.
4. A. Ivashchenko, N.V. Petrukhin, Method of joint modeling of the working process and the thermal state of the CPG “adiabatic engine”. Proceedings of universities. Mechanical Engineering, No. 2, (1987). pp. 61-65.
5. V. Grekhov, N.A. Ivashchenko, N.V. Petrukhin, Features of the flow of working processes in diesel engines with reduced heat removal. Engine Building, No. 8, (1989). No. 8 pp. 3-6.
6. M. Aripdzhanov, Reduction of thermal loads and concentration of harmful emissions by influencing the working process of a diesel engine. Collection of works dedicated to the 175th anniversary of the Moscow State Technical University. N. E. Bauman. (2005). pp.34-35.
7. M. Aripdzhanov., S.M. Kadyrov, A.A. Mirakhmedov, Studies of the thermal stress of a piston with a ceramic lining. Transport science, technology, management. VINITI, No. 7, (2002), pp. 48-49.
8. J. Pohlman, et al: Untersuchungen an Werkstoffen im System AL₂O₃-TiO₂-SiO₂ (Bericht der Keramischen Gesselschaft, Band 52 (1975) Nr 6, s 179-183).
9. M. Aripdzhanov. Method for determining thermal boundary conditions for diesel parts. – Sat. Proceedings of the International Scientific and Technical Conference. Chelyabinsk, (2006).
10. Ismatov, O. Ergashev. Processes of mixture formation, ignition and combustion of a diesel engine. EDPSCIENCES JURNALS. E3S Web Conf. Volume 264, 2021. International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering” (CONMECHYDRO-2021).

DOI: https://doi.org/10.1051/e3sconf/202126404062. (02 June 2021). https://www.edpsciences.org.

11. Kadyrov S M, Musabekov Z E, Khakimov A M 2005 Crankshafts of engines of ‘Tico’ and ‘Nexia’ types, their operational defects (Article) Avtomobil’naya Promyshlennost. Issue 11 Pages 30-31
12. Matmurodov F.M., Yunusov B.A., Khakimov J.O., Daminov O.O. “Mathematical modeling and numerical determination of kinetic and power parameters of loaded power mechanisms of a combined machine”. «1st International Conference on Problems and Perspectives of Modern Science (ICPPMS-2021)». (Ташкент, 10-11 июня 2021 г.)
13. R. Tulaev, Z.E. Musabekov, O.O. Daminov, J.O. Khakimov. Application of supercharged to internal combustion engines and increase efficiency in achieving high environmental standards. 1st International Conference on Problems and Perspectives of Modern Science (ICPPMS-2021)». (Tashkent, 10-11 June 2021.)
14. E. Musabekov, J.O. Khakimov, B. Ergashev Differential equations for calculating gas exchange in an internal combustion engine. E3S Web of Conferences 264, 01003 (2021). The International Scientific Conference “Construction Mechanics, Hydraulics and Water Resources Engineering (CONMECHYDRO 2021)”. 1-3 April 2021. Published online: 02 June 2021. DOI: https://doi.org/10.1051/e3sconf/202126401003
15. Kadyrov S M, Musabekov E E 2001 Arc deposition: Restoration of crankshaft of the diesel D-144 (Article) Avtomobil’naya Promyshlennost Issue 9 Page 25
16. Umerov F., Yunusov R., Tulaev B., Daminov O., Khakimov J., Sattorov N. Calculation of the electric drive with a mechatronic control system for electric vehicles. International conference Agricultural Engineering and Green Infrastructure Solutions AEGIS-2021.
17. Tillahodjaev R.R., Mirzaabdullaev J.B., Mirzaev A.A. Analysis of the feasibility of using solar energy in the climatic conditions of Uzbekistan. International conference Agricultural Engineering and Green Infrastructure Solutions AEGIS-2021.
18. Ismatov J.F. , Jalilov J.Kh., Bekmurodov S.G., Khujamov A., Fayzullaev A.J. Improving The Economic And Environmental Performance Of Engines Through The Use Of Alternative Fuels. The American Journal of Engineering and Technology (ISSN – 2689-0984 Published: April 30, 2021 | Pages: 123-129 Doi: https://doi.org/37547/tajet/Volume03Issue04-19 IMPACT FACTOR 2021: 5. 705 O CLC – 1121105677. Стр. 123-129 .
19. I I Shamsutdinovа, N V Vadulina, A O Salimov, A I Ponomoraev, F.  Ismatov. Ensuring safety in gas mine development. AGRITECH-V-2021. IOP Publishing. IOP Conf. Series: Earth and Environmental Science 839 (2021) 042047. doi:10.1088/1755-1315/839/4/042047. https://iopscience.iop.org/article/10.1088/1755-1315/839/4/042047.