Abstract :

This study aims to design a dynamic system-based Circular Supply Chain Management (CSCM) strategy for waste management in Sleman Regency, Yogyakarta. The increase in population and economic activity has led to a significant increase in waste volume, necessitating a sustainable and efficient management model. The CSCM approach is used because it integrates circular economy principles through the 5R concept (Reduce, Reuse, Recycle, Recover, and Redesign) to create a closed-loop supply chain system for waste management. The research method uses a system dynamics approach. Modeling with qualitative and quantitative analysis stages through the creation of Causal Loop Diagrams (CLD) and Stock and Flow Diagrams (SFD). Research data were obtained from field observations, interviews with the Environmental Agency, and supporting literature. Simulation results show that the existing waste management model in Sleman has implemented some CSCM principles but is still semi-linear. Through the development of four simulation scenarios, Scenario 4, which integrates the Organic Processing Center (OPC), the Plastic Shredding 3RWPS (Reduce, Reuse, Recycle (3R) Waste Processing Site), and the Compost IWPS (Integrated Waste Processing Site), is considered the most optimal in reducing waste generation and increasing management efficiency. This scenario successfully forms a multi-loop circular chain system that minimizes waste, maximizes resource utilization, and shifts the paradigm from waste management to resource management. The resulting model is expected to be a strategic reference for local governments in formulating long-term policies towards sustainable waste management.

---

Keywords :

3RWPS, Circular Supply Chain Management, Dynamic System, IWPS, Scenario, Waste management.

---

References :

1. S Guarnieri, P., Oliveira, LH, Demajorovic, J. 2023. From Trash to Profit: Packaging Waste Management in the Circular Economy. Logistics , Vol. 7(3), Article 66. DOI : 10.3390/logistic7030066.
2. Ranta, V., Aarikka-Stenroos, L., Ritala, P., Mäkinen, SJ 2021. Circular economy innovations and market creation: A study on disruptive business models. Technological Forecasting and Social Change , Vol. 146, pp. 218-231.
3. Dell Technologies. 2023. Closed-loop Plastics Recycling for IT Products. Internal Sustainability Reports . [Unpublished Data].
4. Oliveira, F., Silva, P. 2021. Strategies to promote circular economy in the management of construction and demolition waste at the regional level. Journal of Environmental Management , Vol. 299, Article 113601.
5. Montag, T., Petersen, L., Schupp, F. 2022. Circular Supply Chain Definitions and Conceptualizations. Resources, Conservation and Recycling , Vol. 186, Article 106547 .
6. Agrawal, S., Singh, RK 2019. Analyzing disposition decisions for sustainable reverse logistics: Triple bottom line approach. Resources, Conservation and Recycling , Vol. 150, Article 104448 .
7. Blum, C., Haupt, M., Hellweg, S. 2020. Circular economy and supply chains: Challenges and opportunities. Journal of Industrial Ecology , Vol. 24(5), pp. 1021-1030 .
8. Dissanayake, D., Weerasinghe, S. 2023. Circular supply chain practices: Challenges and innovations. Journal of Operations and Production Management , Vol. 43(2), pp. 234-251 .
9. Vlachos, I. 2016. Reverse logistics capabilities and firm performance: Mediating role of business strategy. Journal of Cleaner Production , Vol. 112, pp. 2114-2124
10. Scott McDonald, A., Singh, S., Chang, C. 2023. Navigating environmental challenges through supply chain quality management 4.0 in circular economy. Global Supply Chain Review , Vol. 2(1), pp. 15-29.
11. Sznitowski, S., Barros, P., Almeida, T. 2023. Circular practices in a rural property in Mato Grosso, Brazil. Rural Sustainability , Vol. 5(3), pp. 89-101 .
12. 2023. Upcycling in Outdoor Apparel Supply Chains. Environmental Progress Reports . [Unpublished] .
13. European Packaging Management Initiative. 2023. Circular models for food packaging waste management. European Journal of Packaging Studies , Vol. 17(4), pp. 45-63.
14. Parajuly, K., Habib, K., Liu, G. 2021. Designing sustainable circular supply chains: The case of electronic waste. Journal of Industrial Ecology , Vol. 25(3), pp. 678-692 .
15. Geisendorf, S., Pietrulla, F. 2018. The circular economy and circular economic concepts: A review of research streams. Journal of Cleaner Production , Vol. 195, pp. 127-140 .
16. Agrawal, S., Singh, RK 2019. Analyzing disposition decisions for sustainable reverse logistics: Triple bottom line approach. Resources, Conservation and Recycling , Vol. 150, Article 104448.
17. Vasquez, J., Ramirez, L. 2023. Waste-to-energy in circular supply chains: Applications in urban settings. Journal of Environmental Innovation , Vol. 9(2), pp. 204-219.
18. Blumhardt, R., Thomson, L. 2023. Leveraging AI for circular supply chain optimization in waste management. Technological Advances in Sustainability , Vol. 14(1), pp. 33-52 .
19. Kravchenko, M., Pigosso, DCA, & McAloone, T.C. (2019). Towards the ex-ante sustainability screening of circular economy initiatives in manufacturing companies: Consolidation of leading sustainability-related performance indicators . Journal of Cleaner Production, 241, 118318 .
20. Çıkmak, E., & Kesici, E. (2023). Circular supply chain practices: Challenges, innovations, and development . Journal of Cleaner Production, 382, 135266 .
21. Vegter, J., Barros, A.I., & Dekker, R. (2021). Circular waste management: Reimagining urban systems in developing countries . Resources, Conservation and Recycling, 169, 105511 .
22. Masi, D., Day, S., & Godsell, J. (2017). Supply chain configurations in the circular economy: A systematic literature review . Sustainability, 9(9), 1602 .
23. Baxter, N., Collings, D., and Adjali, I., 2003. Agent-based modeling – intelligent customer relationship management. BT Technology Journal, 21(2), 126–132.
24. M 1999. International Journal of Operation and Production Management. Volume 19.
25. Bakker, C., Wang, F., Huisman, J., Den Hollander, M., 2014. Products that go round: exploring product life extension through designJ. Clean. Prod. 69,10e16 .
26. K 1996. Environmental Quality in a Growing Economy, pp. 3-14. Balti more, MD: Resources for the Future/Johns Hopkins University Press .
27. Bowen, GA, 2009. Document analysis as a qualitative research method. Quali tative research journal, 9(2), pp.27-40 .
28. Carter, P.L., Monczka, R.M., Ragatz, G.L., & Jennings, P.L. (2009). Supply chain integration .
29. Carter, RC, Dale, SR, 2008. A framework of sustainable supply chain management: moving toward new theory. Int. J Phys. Distribution. Logistics. Manage ment. 38(5), 360e387 .
30. De Angelis, R., Howard, M. and Miemczyk, J., 2018. Supply chain management and the circular economy: towards the circular supply chain. Production Planning & Control, 29(6), pp.425-437 .
31. De Wit, M., Hoogzaad, J., Ramkumar, S., Friedl, H. and Douma, A., 2018. The Circularity Gap Report: An analysis of the circular state of the global economy. Circle Economy: Amsterdam, TheNetherlands .
32. De Angelis, R., Howard, M. and Miemczyk, J., 2018. Supply chain management and the circular economy: towards the circular supply chain. Production Planning & Control, 29(6), pp.425-437 .
33. EMF (Ellen MacArthur Foundation) Towards the Circular Economy: Accelerating the Scale-Up across Global Supply Chains (2014) .
34. Farooque, M., Zhang, A., Thurer, M., Qu, T., & Huisingh, D. (2019). Circular sup ply chain management: A definition and structured literature review. Journal of Cleaner Production
35. Genovese, A., Acquaye, AA, Figueroa, A.and Koh, SL, 2017. Sustainable supply chain management and the transition towards a circular economy: Evidence and some applications. Omega, 66, pp. 344-357 .
36. Ghisellini et al., 2018 P. Ghisellini, X. Ji, G. Liu, S. Ulgiati Evaluating the transition towards cleaner production in the construction and demolition sector of China: a review J. Clean. Prod., 195 (2018), pp. 418-434 .
37. Gorrisen L et al 2016. Transition thinking and business model innovation towards a transformative business model and new role for the reuse centers of Limburg .
38. Hasanaj, M. and Jansson, A., Supply Chain Management–A way to achieve a Circular Economy . Hobson, K., 2016. Closing the loop or squaring the circle? Locating generative spaces for the circular economy.
39. Min 2010. Artificial intelligence in supply chain management and theory. International journal of Logistics.
40. Hobson, K., Lynch, N., Lilley, D., Smalley, G., 2017. Systems of practice and the Circular Economy: transforming mobile phone product service systems. Mental environment. Innovation.
41. Hong, P., & Jeong, J. (2006). Supply chain management practices of SMEs: from a business growth perspective. Journal of Enterprise Information Management, 19(3), 292-302
42. Humphreys, P., Huang, G., and McIvor, R., 2002. An expert system for evaluating the make or buy decision. Computers and Industrial Engineering, 42(2/4), 567–585.
43. Journal of Physical Distribution & Logistics Management, 44(6), 434-463.
44. Lorentz, H & Hilmola, O 2012, ‘Confidence and supply chain disruptions’, Journal of Modeling in Management, vol. 7, no. 3, pp. 328-356
45. Meadows et al., 1972 DH Meadows, DL Meadows, J. Randers, WW Behrens The Limits to Growth. Universe Books New York (1972).
46. Nasir et al 2017. Comparing linear circular supply chains. Production Journal
47. W .2010 The Performance Economy 2010.
48. Weetman, C, 2017. A circular economy handbook for business and supply chains: Repair, Remake, Redesign, Rethink, Kogan page.
49. Wang and Kuah, 2018 P. Wang, ATH Kuah Green cradle-to-cradle marketing: remanufactured products in Asian markets Thunderbird Int. Business Rev., 60 (5) (2018), pp. 783-795.
50. Azevedo, BD, Scavarda, LF, Caiado, RGG 2019. Urban solid waste management in developing countries from the sustainable supply chain management perspective: A case study of Brazil’s largest slum. Journal of Cleaner Production, Vol. 233, pp. 1377-1386.
51. Zhou, Z., Chi, Y., Dong, J., Tang, Y., Ni, M. 2019. Model development of sustainability assessment from a life cycle perspective: a case study on waste management systems in China. Journal of Cleaner Production, Vol. 210, pp. 1005-1014
52. Fetanat, A., Mofid, H., Mehrannia, M., Shafipour, G. 2019. Informing energy justice based decision-making framework for waste-to-energy technologies selection in sustainable waste management: a case of Iran. Journal of Cleaners
53. Kuznetsova, E., Cardin, MA, Diao, M., Zhang, S. 2019. Integrated decision support methodology for combined centralized-decentralized waste-toenergy management systems design. Renewable and Sustainable Energy Reviews, Vol. 103, pp. 477-500.
54. Phonphoton, N. & Pharino, C. 2019. Multi-criteria decision analysis to mitigate the impact of municipal solid waste management services during floods. Resources, Conversation and Recycling, Vol. 146, pp. 106-113.
55. Phonphoton, N., & Pharino, C. 2019. A system dynamics modeling to evaluate flooding impacts on municipal solid waste management services. Waste Management, Vol. 87, pp. 525-536.
56. Tirkolaee, EB, Mahdavi, I., Esfahani, MMS, Weber, GW 2020. Strong green site allocation inventory problem to design urban waste management systems under uncertainty. Waste Handling, Vol. 102, pp. 340-350.