Abstract :
It is crucial to preserve the networked control systems (NCS) transient performance and stability because adding uncertain parameters degrades system performance and introduces instability. Thus, the analysis of NCS system performance under uncertain conditions, such as disturbance, is the focus of this paper. The performance of NCS is demonstrated using control action and some appropriate stability conditions.
The simulation diagram in result section displays effectiveness of proposed methodology and shows a comparative analysis of the response signal with and without control action along with disturbance in NCS. Experiments conducted in the MATLAB Simulink environment demonstrate the efficacy of the suggested methodology.
Keywords :
Delay, Denial of service (DoS), Kalman filter, networked control system, Packet loss, proportional integral control (PID)References :
- X. Wang and M. D. Lemmon, “Event-triggering in distributed networked control systems,” IEEE Trans. Automat. Contr., vol. 56, no. 3, pp. 586–601, 2011.
- R. Gupta and M. Y. Chow, “_Networked Control System Overview.pdf,” IEEE Trans. Ind. Electron., vol. 57, no. 7, pp. 2527–2535, 2010.
- Y. Wu, Y. Wu, and Y. Zhao, “An Enhanced Predictive Control Structure for Networked Control System with Random Time Delays and Packet Dropouts,” Proc. – 2016 3rd Int. Conf. Inf. Sci. Control Eng. ICISCE 2016, pp. 834–838, 2016.
- B. S. Solanki, “Stability and Performance Analysis of Networked Control System Experienced Variable Uncertain Dynamics,” Int. J. Mod. Dev. Eng. Sci., vol. 3, no. 9, pp. 6–10, 2024.
- L. Lu and J. Lin, “H∞Output Tracking Control for Networked Control Systems with Long Time Delays,” Proc. 2018 Chinese Autom. Congr. CAC 2018, pp. 892–897, 2018.
- B. S. Solanki, “Controlled Output Feedback to Stabilize Networked Control System,” Int. J. Mod. Dev. Eng. Sci., vol. 3, no. 9, pp. 1–5, 2024.
- B. Singh Solanki, R. Kumawat, and S. Srinivasan, “Optimal switching control design for industrial networked control system with uncertain exogenous dynamics,” Mater. Today Proc., vol. 79, no. xxxx, pp. 286–291, 2023.
- X. Chen and S. Hu, “Event-based output tracking control for networked T-S fuzzy systems under non-periodic DoS jamming attacks,” ANZCC 2018 – 2018 Aust. New Zeal. Control Conf., pp. 69–74, 2019.
- Q. Zhang and F. Qu, “Stabilization of Networked Control Systems via Switching and Impulsive Controllers,” Proc. 31st Chinese Control Decis. Conf. CCDC 2019, pp. 1852–1856, 2019.
- P. Wang and G. Feng, “A study of optimal control strategy of networked control systems with stochastic delay and packet losses,” CARE 2013 – 2013 IEEE Int. Conf. Control. Autom. Robot. Embed. Syst. Proc., pp. 1–5, 2013.
- G. Bhatnagar, N. Gobi, H. Aqeel, and B. S. Solanki, “Sparrow-based Differential Evolutionary Search Algorithm for Mobility Aware Energy Efficient Clustering in MANET Network,” Int. J. Intell. Syst. Appl. Eng., vol. 11, no. 8s, pp. 135–142, 2023.
- X. Tang, M. Wu, M. Li, and B. Ding, “On Designing the Event-Triggered Multistep Model Predictive Control for Nonlinear System Over Networks With Packet Dropouts and Cyber Attacks,” IEEE Trans. Cybern., pp. 1–13, 2021.
- C. F. Caruntu and R. C. Rafaila, “Robust MPC for networked control systems with data-packet dropouts modeled as disturbances,” 2017 21st Int. Conf. Syst. Theory, Control Comput. ICSTCC 2017, pp. 152–157, 2017.
- H. C. Cho and M. S. Fadali, “Nonlinear network-induced time delay systems with stochastic learning,” IEEE Trans. Control Syst. Technol., vol. 19, no. 4, pp. 843–851, 2011.
- L. Hu, Z. Wang, and W. Naeem, “Security analysis of stochastic networked control systems under false data injection attacks,” 2016 UKACC Int. Conf. Control. UKACC Control 2016, pp. 1–6, 2016.
- R. Gupta, B. S. Solanki, M. Kumar, and R. Murugan, “Detecting Malware on the Android Phones Based on Golden Jackal Optimized Support Vector Machine,” Int. J. Intell. Syst. Appl. Eng., vol. 11, no. 8s, pp. 01–07, 2023.
- W. Lu, X. Yin, Y. Fu, and Z. Gao, “Observer-based event-triggered predictive control for networked control systems under dos attacks,” Sensors (Switzerland), vol. 20, no. 23, pp. 1–21, 2020.
- Q. Zhang, B. Liu, and W. Huang, “Stabilization of Nonlinear Networked Switched Control Systems with Delays and Packet Losses,” Proc. 15th IEEE Conf. Ind. Electron. Appl. ICIEA 2020, pp. 332–338, 2020.
- J. N. Singh and B. S. Solanki, “Utilization of Computational Intelligence in the Development of a Health Monitoring System for Induction Machines,” 2022 Int. Conf. Futur. Technol. INCOFT 2022, pp. 1–6, 2022.
- S. P. Singh and B. S. Solanki, “A Trading Model on Block chain Smart Contracts for the Shared Energy in Brazil,” 4th Int. Conf. Emerg. Res. Electron. Comput. Sci. Technol. ICERECT 2022, pp. 1–5, 2022.
- B. S. Solanki, “Design of an Optimal Reliable Controller for Industrial Networked Control System to Mitigate Network Imperfections,” 2022.
- M. Li et al., “Suppression of Disturbances in Networked Control Systems with Time-Varying Delay Based on Equivalent-Input-Disturbance Approach,” IECON Proc. (Industrial Electron. Conf., vol. 2019-Octob, pp. 6957–6960, 2019.
- S. Solanki, B.S., Kumawat, R., Srinivasan, “Optimized Control Function with Estimation of System Parameters Against Attack for Networked Control System,” in Intelligent Computing Techniques for Smart Energy Systems. Lecture Notes in Electrical Engineering, 2022, vol. 862, pp. 515–528.
- M. Zhu and S. Martinez, “On the performance analysis of resilient networked control systems under replay attacks,” IEEE Trans. Automat. Contr., vol. 59, no. 3, pp. 804–808, 2014.
- C. W. Ying and L. J. Yu, “Output Feedback Control of Networked Control Systems with Compensate for Packet Loss and Random Time Delays,” Proc. – 2020 7th Int. Conf. Inf. Sci. Control Eng. ICISCE 2020, pp. 967–971, 2020.
- B. S. Solanki, “Mitigating Effect of Uncertain Exogenous Dynamics by Parametric Performance Improvement with Optimal Control Design,” Int. J. Eng. Trends Technol., vol. 70, no. 5, pp. 209–220, Jun. 2022.
- Z. Gu, J. H. Park, D. Yue, Z. G. Wu, and X. Xie, “Event-Triggered Security Output Feedback Control for Networked Interconnected Systems Subject to Cyber-Attacks,” IEEE Trans. Syst. Man, Cybern. Syst., vol. 51, no. 10, pp. 6197–6206, 2021.
- B. S. Solanki, R. Kumawat, and S. Srinivasan, “Averting and Mitigating the Effects of Uncertainties with Optimal Control in Industrial Networked Control System,” Proc. – 2021 IEEE Int. Symp. Smart Electron. Syst. iSES 2021, pp. 316–318, 2021.
- Y. Su, J. Wu, C. Long, and S. Li, “Event-triggered Control for Networked Control Systems under Replay Attacks,” Proc. 2018 Chinese Autom. Congr. CAC 2018, pp. 2636–2641, 2019.
- H. Xu, S. Jagannathan, and F. L. Lewis, “Stochastic optimal design for unknown linear discrete-time system zero-sum games in input-output form under communication constraints,” Asian J. Control, vol. 16, no. 5, pp. 1263–1276, 2014.
- B. S. Solanki, R. Kumawat, and S. Srinivasan, “An Impact of Different Uncertainties and Attacks on the Performance Metrics and Stability of Industrial Control System,” in Lecture Notes in Networks and Systems, 2021, vol. 204, pp. 557–574.
- B. S. Solanki, R. Kumawat, and S. Srinivasan, “Synthesize the Effect of Intrusion and Imperfection on Networked-Connected Control System with Optimal Control Strategy,” 2021 10th Int. Conf. Inf. Autom. Sustain. ICIAfS 2021, pp. 105–110, 2021.
- T. Kumar, M. Sharma, and B. S. Solanki, “New Designs and Analysis of Multi-Core Photonic Crystal Fiber Using Ellipse with Different Radiuses and Angles,” in International Conference on Artificial Intelligence: Advances and Applications 2019, 2020, pp. 151–159.
- B. Singh and O. P. Sharma, “Analysis of BER in BPSK and GMSK Employing Different Coding,” IFRSA’s Int. J. Comput., vol. 2, no. 4, pp. 736–741, 2012.
- B. S. Solanki, “Control System for Wind Power Plant,” Int. J. Sci. Dev. Res., vol. 4, no. 3, pp. 473–476, 2019.
- X. Tang, T. Li, S. Cong, and W. Qian, “Event-triggered adaptive control for networked control systems under two stochastic cyber-attacks,” Proc. 31st Chinese Control Decis. Conf. CCDC 2019, pp. 170–175, 2019.
- M. Li, J. She, Z. T. Liu, M. Wu, and Y. Ohyama, “Suppression of Packet Losses and Disturbances in Networked Control Systems Based on Equivalent-Input-Disturbance Approach,” IEEE Trans. Cybern., vol. 53, no. 4, pp. 2051–2061, 2023.
- Z. Wang, S. Fukushima, and T. Hachino, “Model Predictive Control Approach on Packet Dropout Prevention of Networked Control Systems,” Proc. – 2018 5th Int. Conf. Inf. Sci. Control Eng. ICISCE 2018, pp. 839–843, 2019.
- B. Singh, “Solar Power Generation by PV Technology,” IRE Journals, vol. 1, no. 9, pp. 260–265, 2018.
- B. S. Solanki, K. Renu, and S. Srinivasan, “Stability and Security Analysis with Identification of Attack on Industrial Networked Control System: An Overview,” Internetworking Indones. J., vol. 11, no. 2, pp. 3–8, 2019.
- B. Singh and O. P. Sharma, “Analysis of Coded and Uncoded Digital Modulation Techniques,” Int. J. Electron. Commun. Technol., vol. 4, no. 4, pp. 46–48, 2013.
- B. S. Solanki, “Review of Uncertain Dynamics in Networked Control System for Analysis of Stability,” Int. J. Mod. Dev. Eng. Sci., vol. 3, no. 9, pp. 11–15, 2024.
- J. Zhang, C. Peng, S. Masroor, H. Sun, and L. Chai, “Stability analysis of networked control systems with denial-of-service attacks,” 2016 UKACC Int. Conf. Control. UKACC Control 2016, 2016.