Abstract :

As computer technology and instrument technology advance rapidly, both virtual instrument and Lab-VIEW have significantly grown. LabVIEW is extensively employed in the industrial and academic sectors for developing data acquisition systems, instrument control software, and analysis software. This paper presents the design of a multi-channel temperature measurement system based on a single-chip CPU and LabVIEW. The system consists of analog-to-digital conversion modules, temperature measurement modules, and data acquisition modules. The system uses the Nyquist-Shannon sampling theorem and the advantages of various digital filter types to obtain temperature uncertainty, including the compensation uncertainty of the reference junction. The system is of high quality in measuring accuracy, stability, scalability and other aspects. The complete system was inspected and verified using a superconducting magnetic energy storage device (SMES). The results demonized the ease of construction, practicality and precise regulation of the system. These results also show that temperature measurement devices are less than 0.1°C absolute error and are highly accurate, making them valuable for applications that require precise temperature measurements.

---

Keywords :

Data acquisition component, Labview; sensor, Multi-Channel Temperature, Thermocouple.

---

References :

1. Antonio José Calderón , Isaías González , “A New, Scalable and Low Cost Multi-Channel Monitoring System for Polymer Electrolyte Fuel Cells” 9 March 2016 pp 1-19
2. Liang Wen, Xiao Yuan Chen, “LabVIEW-based multi-channel measurement and protection system for HTSdevice applications” October 2013.
3. Jiming Ren, Dun Liu, Wenwen Liu , “Multi-Channel Temperature Measurement System based on LabVIEW” , Vol 4, Nov 2016.
4. Bigeng Zheng, Xinrui Chen, “Design of Multi-channel data acquisition systembased on single Chip computer and LabVIEW”, 2019.
5. Masnicki R, Swisulski D. Multi-Channel Virtual Instrument for Measuring Temperature—A Case Study. Electronics. 2023; 12(10):2188. https://doi.org/10.3390/electronics12102188.
6. Chang Shuo, Li Jianyu , Jiang Tao, Liu Huanqian, Ding Yueqiang “Labview-Based Multi-Channel Automatic Verification System ForTemperature Sensors”, 2020.
7. Susmitha G.Sowmyabala “Design and Implementation of Weather Monitoring and Controlling System”, Volume 97– No.3, July 2014.
8. Xingju Wang, Zongjian Huang, “Design of Temperature Measurement and Data Acquisition System Based on Virtual Instrument LabVIEW”, Vol. 12, No. 8, August 2014, pp. 6027 -6035.
9. Yoong Yen Kee1, Yutaka Asako, Tan Lit Ken, Nor Azwadi Che Sidik, “Uncertainty of Temperature measured by Thermocouple” Issue 1 (2020) 54-62.
10. Weimin Zhu, Haima Yang, Jin Liu, Chaochao Yan “Design of High Precision Temperature Measurement System based on Labview” Vol. 6, No. 6, 2015.
11. Yizhen Nie “Design of High Precision Temperature Sensor based on Platinum Resistance” Vol 539 (2014) pp 177-180.
12. Wenyu Cai, Chengguo Qian, Haimin Zhang “The Design of ADS1220 Temperature Acquisition Controller Based on CPLD”
13. MAX V series CPLD datasheet [EB/OL]. https://www.altera.com.cn/products/cpI dlmax-series/ma x-v/overview.html.
14. ADS1220 datasheet [EB/OL]. http://www.ti.com/product/ADS 1220/datasheet.
15. Zhanyou SHA, Yanpeng WAND, Hongtao MA “Introduction to LED driving circuits design.Beijing” China Electric Power Press, 2012.
16. Huanxin Cheng, Kai Zhang, Li Cheng “ Design a Temperature Control System Based on Labview” Vols. 644-650 (2014) pp 95-98.
17. Xiaoxi Fang, Xueqing Cheng Room “The Labview Graphical Programming and Application.” Beijing: China railway publishing house, 2005
18. Wei Zhang. Hongli Liu. “Temperature measurement and control system based on Labview design” . Xi an: foreign electronic components, 2009.5.
19. Jeffrey Travis. Jim Kring “ Labview University Practical Tutorial” (third edition). Beijing: electronic industry press, 2008.6.
20. Wu Aiguo, Du Chunyan,Song Xiaogiang “A Fuzzy Controller With Self-Optimizing Parameters and Its Application in the Central Air-conditioning System” ENGINEERING SCIENCE, 2004,6(11).
21. Guo Yongji “Central air-conditioning temperature control system” [D]. Lanzhou University of Technology,2008.
22. Shufen LI, Junli LIU, Jungin LIU “Design on the Central Air-conditioning Controller Based on LabVIEW” , 2010 International Conference on Computer Application and System Modeling (ICCASM 2010).
23. Fang Peng, “Algorithm based on fuzzy PID Temperature Control System Central Air Conditioning [D]” , Hefei University of Technology,2009.
24. CAI Jiang-lin, “ A Temperature Measurement Instrument with PID Control Based on Fuzzy Control Theory” [J]. INSTRUMENTATION TECHNOLOGY. 2008, (6).
25. ZHAO Rui-jun, WANG Xian-lai. “Fuzzy-PID Controller in Air Temperature Control” [J], COMPUTER SIMULATION, 2006, 23(11).