Abstract :

Electrical power generation can be achieved through many means, one of which includes using a gas turbine. Gas turbine performance is highly dependent on ambient temperature; as temperature increases gas turbine power output is lessened. This can be a huge problem in warmer regions like Nigeria. Gas turbines use the surrounding air to generate electricity and this gives rise to a method or curbing the effect of high ambient temperatures. Once the volumetric rate is constant as is the case in a gas turbine system, air density and ambient temperature are inversely proportional; this allows mass flow rate to be inversely proportional to temperature. To fully take advantage of this, there are many methods that can be implemented to achieve this cooling effect. A few of these methods were investigated in this study to determine their strengths and susceptibilities. The performance characteristics were scrutinised for a range of operational values including ambient temperature, humidity and air density. The results showed that air cooling significantly improved the power output of the gas turbine. At standard temperature of 32^oc, the base case was 37.87 MW while evaporative cooler, mechanical and absorption chillers were 37.70 MW, 40.39 MW and 41.07 MW respectively.

---

Keywords :

Air cooling, Ambient temperature, Electricity, Gas turbine, Volumetric rate.

---

References :

1. Alhazmy, M. M., & Najjar, Y. S. H. (2004). Augmentation of gas turbine performance using air coolers. Applied Thermal Engineering, 24(2–3), 415–429. https://doi.org/10.1016/j.applthermaleng.2003.09.006.
2. Ameri, M., Nabati, H., & Keshtgar, A. (2004). Gas turbine power augmentation using fog inlet air-cooling system. Proceedings of the 7th Biennial Conference on Engineering Systems Design and Analysis, 73–78. https://doi.org/10.1115/esda2004- 58101.
3. Arabi, S. M., Ghadamian, H., Aminy, M., Ozgoli, H. A., Ahmadi, B., & Khodsiani, M. (2019). The energy analysis of GE-F5 gas turbines inlet air–cooling systems by the off design method. Measurement and Control (United Kingdom), 52(9–10), 1489–1498. https://doi.org/10.1177/0020294019877485.
4. Cao Y, Ren J, Sang Y, Dai Y.(2017). Thermodynamic analysis and optimization of a gas turbine and cascade CO 2 combined cycle. Energy Convers Manage, 144: 193–204. https://doi.org/10.1016/j.enconman.2017.04.066.
5. Carcasci, C., Cosi, L., Ferraro, R. and Pacifici, B.(2017). Effect of a real steam turbine on thermoeconomic analysis of combined cycle power plants. Energy, 138:32- 47. https://doi.org/10.1016/j.energy.2017.07.048.
6. Ejenavi, O. W. (2018). Performance Analysıs Of Gas Turbıne Power ( A Case Study Of Delta Iıı Gt9 Transcorp Gas Turbıne Power Plant , Ughellı , Nıgerıa ). July.
7. Hou S, Zhou Y, Yu L, Zhang F, Cao S.(2018). Optimization of the combined supercritical CO2 cycle and organic Rankine cycle using zeotropic mixtures for gas turbine waste heat recovery. Energy Convers Manage 2018;160:313–25. https://doi.org/ 10.1016/j.enconman.2018.01.051.
8. Kakaras, E., Doukelis, A., Prelipceanu, A., Karellas, S. (2006). Inlet air cooling methods for gas turbine based power plants. ASME., 128: 312-317.
9. Kang, D.W, Kim, T.S. (2018). Model-based performance diagnostics of heavy-duty gas turbine using compressor map adaptation. Applied Energy 212:1345-59. https://doi.org/10.1016/j.apenergy.2017.12.126.
10. Kim, Y.M, Sohn, J.L, Yoon, E.S.(2017). Supercritical CO ₂ Rankine cycles for waste heat recovery from gas turbine. Energy 2017;118:893–905. https://doi.org/10.1016/j. energy.2016.10.106.
11. Kwon, I.H, Kang, D.W.& Kim, T.S.(2013). Using coolant modulation and pre-cooling to avoid turbine blade overheating in a gas turbine combined cycle power plant fired with low calorific value gas. Applied Thermal Engineering;60:285-94. https://doi.org/10.1016/j.applthermaleng.2013.07.008.
12. Mee, T. (1999). “Reduction of Gas Turbine NOX Emissions by Inlet Air Fogging” 18th Annual Power Systems Conference, Iran. Irandanesh
13. Popli S, Rodgers P. & Eveloy V. (2013) Gas turbine efficiency enhancement using waste heat powered absorption chillers in the oil and gas industry. Applied Thermal Engineering 2013;50: 918-31. https://doi.org/10.1016/j.applthermaleng.2012.06.018.

14. Santos, A. P. & Andrade, C. R. (2012). Analysis of gas turbine performance with inlet air cooling techniques applied to Brazilian sites. Journal of Aerospace Technology and Management, 4(3), 341–353. https://doi.org/10.5028/jatm.2012.04032012.

15. Specifications of 7HA.02. Products part of Heavy-duty gas turbine of GE; 2017. https://www.gepower.com/gas/gas-turbines/7ha.
16. Specifications of mechanical chillers (2016). Products part of EBARA REFRIGERATION EQUIPMENT & SYSTEMS COMPANY; http://www.ers.ebara.com/en/product/turbo/turbo-rtcsrtcf-series-high-efficiencycentrifugal-chiller-using-low-pressure-refrigerant.html.
17. Turbine inlet cooling technologies.(2016). Technology Overview of Turbine Inlet Cooling Association.

http://www.turbineinletcooling.org/technologies.html.

18. Xiaojun, S., Brian, A., Defu, C. & Jianmin, G. (2010). Performance enhancement of conventional combined cycle power plant by inlet air cooling, inter-cooling and LNG cold energy utilization. Ther. Eng., 30: 2003-2010.
19. Yi, J.H, Choi, J.H, Kim, T.S. (2016). Comparative evaluation of variable options for combining a gas turbine and a solid oxide fuel cell for high performance. Applied Thermal Engineering 100:840-8.